Masthead - Climate Control Journal

DriSteem introduces Buyer’s Guide

EDEN PRAIRIE, Minnesota, 17 August 2021: DRI-STEEM Corporation, manufacturer of humidification, evaporative cooling and water treatment products, announced the  introduction of a new buyer’s guide focused on humidification for electronics manufacturing.

DriSteem said it knows the importance of maintaining the appropriate humidity level within electronics manufacturing facilities, as proper relative humidity (RH) levels between 30% and 70% can significantly help decrease damage and stress to electronic components. When humidity levels are greater than 70%, corrosion can become an issue, the company said. In a controlled environment, manufacturers experience a reduction of electrostatic discharge, fewer brittle components, and fewer issues with soldering and de-soldering; they as well are able to create a safe environment for staff, the company added.

“This specific buyer’s guide is positioned to educate facility directors at electronics manufacturing plants about the importance of maintaining proper humidity to not only protect the products they are developing but to also keep workers safe and healthy,” said Randall Potter, Business Development Leader, DriSteem. “Many facility directors have expressed a need for educational materials and meetings. This buyers guide is an easily accessible way to help educate building management about the importance of humidity and how best to manage it throughout a facility.”

Building for the “new normal”

As the world continues to grapple with an ever-shifting economic landscape, owing to the COVID-19 pandemic, stakeholders in the building sector across the GCC region have observed how the pandemic has triggered an evaluation and reassessment of priorities. Ashok Jha, Head FM and Retrofit Projects, Universal Voltas, points out that the unprecedented disruption caused by COVID-19 has prompted many organisations to take actions they have been putting off for some time, including launching new digital services and evolving their business models, enabling greater flexibility in their working and implementing cost optimisation measures.

However, Jha says, perhaps the most notable trend would be the move towards a greater number of retrofit projects in the region. “Because of the COVID-19 pandemic, the oil prices plummeted to one of the lowest levels and government revenues went down in the GCC region,” he says. “This has led to reduced spending across all sectors, including new construction, with the current market seeing greater push towards shallow retrofitting, deep retrofitting, energy conservation and reducing the building carbon footprint in the existing buildings to make them more sustainable.” Jha says that since the number of existing buildings in Oman, Kuwait and the UAE is very high compared to new buildings, there was also a need to address the physical deterioration of the buildings, due to functional and economic obsolescence, and to make them more sustainable. “Because of this, there is a surge in demand for the retrofitting of the existing buildings across the GCC region,” he says (see sidebar).

Andrea Di Gregorio, Executive Director, Reem, Ras Al Khaimah Municipality, also believes the region is poised to see a strong pipeline of retrofit projects. “More focus is being put in refurbishing existing buildings, to bring them up-to-speed with the latest best practices in sustainability,” he says. “We see an increase in interest from building owners in retrofit activities, and we expect this interest to further increase throughout 2021 and in the coming years.”

Energy efficiency and sustainability 

Another major driver for retrofits is the move towards energy efficient and sustainable practices, which has long been heralded by experts in the sector. Jha points out that because of the detrimental impact of buildings on the environment, with occupied buildings and the construction sector accounting for 36% of the global energy consumption and nearly 40% of total direct and indirect CO2 emissions according to International Energy Agency (IEA), the UAE has begun to actively transition into smart and sustainable cities, which has turned the focus on the energy efficiency of the buildings, specifically existing ones. 

In addition to its impact on overall sustainability efforts, much of the move can be attributed to growing awareness on return of investment in terms of reduced operational cost. As Jha points out, retrofitting primarily refers to the measures being taken to replace legacy energy and utility systems with new and energy-efficient technologies. “These technologies not only reduce energy consumption and decrease carbon emissions but also lower maintenance costs, improve safety, enhance productivity, boost property valuations and also prolong the useful life of the assets and the building as a whole,” he says. “In a nutshell, we can say that OPEX of the building reduces and the asset value increases. Hence, it is becoming important day by day to retrofit buildings to not only make them more sustainable for the future but also to derive economical value by reducing the operational cost and, in turn, optimise the rentals and make them more lucrative for the tenants.”

Weighing in, Di Gregorio says that sustainable buildings often result in lower life cycle cost of the building itself. “If sustainability features are carefully selected, operational savings – in terms of energy and water usage and equipment maintenance – typically exceed any incremental investments that those features require,” he says. “For this reason, in a perfect market, where developers are able to fairly monetise their investments in higher quality buildings, we would expect for tenants any rent premiums for more sustainable buildings to be exceeded by the value of operational savings.”

Jha adds that as energy prices continue to rise, the relative benefits of energy efficiency will become increasingly important, and this is leading to a huge surge in demand for equipment, such as Smart LED lights and motion sensors, air curtains and FAHUs, energy-efficient AHUs, FCUs or split units and VAV systems. This has also led to greater demand for water usage reduction through the use of low-flow fixtures, sensors, waterless urinals and low-flush WCs, and also for photovoltaic panels on rooftops to generate electricity from the solar power, among other solutions. 

A renewed focus on IAQ 

While the return on investment (ROI) from retrofitting for energy efficiency is becoming clear, stakeholders are hopeful that the new wave of retrofits would also accommodate enhancements of indoor air quality (IAQ), which has been typically overlooked over the past years. Di Gregorio says that he believes this would be the case. “There is increasing interest in IAQ, partly driven by COVID-19 concerns,” he says. “Some awareness and technical barriers are there; nonetheless we foresee development in this area in the future.”

Jha shares a similar opinion. He says: “Fear of pandemic is looming large in the minds of the people, and therefore, while carrying out the retrofitting of their buildings, owners are ensuring that retrofit projects also take into consideration IAQ of the buildings, where people are currently spending more than 90% of their time and also to reduce the chances of contamination through virus, bacteria, moulds and fungi.”

Di Gregorio says there is a lot of focus on safety and security from building owners, particularly in what concerns disinfection of common areas. “This sometimes adds to other measures, like filtration, turning into improved air quality,” he says. Jha adds that some of the measures that building owners are taking include Demand Control Ventilation through C02 sensors, fitting volume control dampers, ultraviolet lamps in AHUs, ultraviolet germicide irradiation and MERV 13/14 filters. He further adds that there has been an increase in the use of humidifiers and dehumidifiers to maintain humidity in the range of 40-60%, where the microbial and fungal growth is minimal.

Jha also says that the majority of the offices are allowing their staff to work from home and that people are spending more than 90% of their time indoors. “This further necessitates that apt measures are taken by the occupants to ensure proper lux levels, ergonomics and IAQ, as these will have a profound impact on their health and wellbeing and, in turn, impact their productivity,” he says. “Hence, there cannot be a better time than now to address the Indoor Environment Quality (IEQ) issues, if any.” Jha says these are the factors driving a lot of investment being done by the property owners in the built-environment to retrofit their buildings to ensure proper IAQ against the traditional retrofit, where emphasis was mainly towards energy efficiency.

Making a case for retrofits 

Keeping in mind the tangible and intangible benefits of retrofitting, Di Gregorio believes there is more than enough evidence to drive building owners to invest in such initiatives. “If building owners are not thinking about retrofits, they definitely should!” he says. “Retrofit projects tend to have very favourable returns. We are observing that for comprehensive retrofits of commercial buildings in Ras Al Khaimah, the payback time is 3-5 years. And the contracting standards that are being adopted often provide forms of guarantees for the investor on those returns.”

Jha, agreeing, says that in spite of the change in the occupancy profile of buildings, property owners must continue to retrofit within the built-environment. “Retrofitting of existing buildings offers tremendous opportunities for improving asset performance in terms of utilities,” he says. “Retrofitting also offers a potential upside in the overall performance of the building through improved energy efficiency, increased staff productivity, reduced maintenance costs, and better thermal comfort.” Jha believes that such key drivers should serve as a motivation and incentive for building owners, who are on the fence about investing in retrofit projects.

Retrofitting in Kuwait, Oman and the UAE

Ashok Jha

COVID-19 has had a significant adverse impact on organisations, people’s health, their livelihoods and the economy at large in the GCC region countries, says Ashok Jha, Head, FM & Retrofit Projects, Universal Voltas LLC. However, Jha is quick to point out that while the duration and severity of COVID-19’s impact on economies and sectors will undoubtedly vary, companies and governments in the GCC region have done well to set in motion a “look ahead, anticipate, innovate and adjust” roadmap, which has led the construction sector to focus on energy optimisation and retrofitting in existing buildings, which is a key to sustainable construction.

 

Oman 

Citing figures from Global Data, a leading data and analytics company, Jha says that Oman’s construction industry contracted sharply in 2020, plummeting by nearly around -10.3%. “The industry is struggling with challenges presented by the COVID-19 outbreak, low oil prices, and the impact of sovereign credit rating downgrades,” he says. Further compounding the downside risks to the outlook for the industry, the Omani Government has had to rationalise spending.”

Jha adds that given the limited prospects for the government to boost investment in infrastructure and other investment projects, a recovery in the construction sector is expected to be very slow. “Global Data currently expects the construction industry to fall further in 2021, with output contracting by -5.8%,” he says. “The fiscal plan by the Oman Government is intended to reduce public debt, increase the state’s reserves, and diversify revenue away from the oil sector.”

Owing to these factors, Jha believes that new construction spend will be very minimal, and more impetus will be on the retrofitting, deep retrofitting, fit-outs and energy performance optimisation in the built-environment in Oman.

Kuwait

Kuwait has faced similar challenges, Jha says, adding that the construction market shrunk in the year 2020 at about -9.5% approximately, as per Global Data. “The construction industry is struggling with the challenges presented by the outbreak of COVID-19, low oil prices and the impact of sovereign credit rating downgrades,” he says. “Because of this, focus is more towards existing buildings in Kuwait.”

Jha adds that within the built-environment in Kuwait, residential buildings constitute around 81%, commercial buildings are 11%, whereas government buildings constitute four per cent; the remaining four per cent includes commercial, industrial, agricultural and services. “Also, Kuwait has one of the highest per capita electricity consumption and carbon footprint globally, which further necessitates the retrofitting of the buildings to make them more sustainable,” he says. “All the above factors, along with the economic strain, is forcing Kuwait to focus on energy conservation, deep retrofitting, retrofitting and fit-outs in the built-environment with a very minimal spending on new construction.”

UAE

Sharing observations on the UAE market, in particular, Jha says that the COVID-19 outbreak, coupled with low oil prices, has led the construction output in the UAE to contract by nearly 4.8% in 2020, but that a rebound is expected in 2021, as per Global Data. “New project opportunities are expected to be minimal in the coming quarters, as the government is consolidating its widening fiscal debt and COVID-19-related force majeure,” he said. “Over the medium- to longer-term, government investment will remain focused on upgrading physical infrastructure and reforming the financing and regulatory environment.”

Jha adds that the UAE has set high targets for building retrofit, which are reflected in the UAE Energy Strategy 2050 and the Dubai Integrated Energy Strategy. “The latter targets an overall 30% reduction in energy and water use by 2030,” he says. “To support this, Etihad ESCO aims to retrofit 30,000 buildings in the next 10 years and generate 1.68TWh energy savings and around 5.64 BIG of water savings by year 2030.”

DriSteem wins award for its GTS LX Series Humidifier

EDEN PRAIRIE, Minnesota, 16 December 2020: DRI-STEEM Corporation (DriSteem), manufacturer of humidification, evaporative cooling and water treatment products, has received the BUILD Construction & Engineering award for the ‘Best in Commercial Humidification Solution Provider of 2020’ for its GTS LX Series Humidifier.

Making the announcement through a Press release, DriSteem said the Best in Commercial Humidification Solution award is selected by the BUILD Construction & Engineering research team. Those selected met merit-oriented criteria, researched via public domain with many factors taken into consideration, the company said. The nominee proved evidence of expertise within its field, dedication to customer service and client satisfaction with an ongoing commitment to excellence and innovation, the company added.

“We are truly thrilled to receive this prestigious award, five years running,” said Mysty Hanson, Product Manager, DriSteem. “It is always an honor when your work is recognized in the industry as being one of the best.”

According to DriSteem, the GTS LX Series Humidifier is the only gas-fired humidifier that combines the highest efficiency on the market with ultra-low NOx in a single design, thermal combustion efficiency, 94% higher heating value of fuel and 103% lower heating value of fuel. All LX Series humidifiers, the company said, feature new touchscreen displays. The new display, it added, has all the industry-leading functionality of its Vapor-logic controller, with intuitive interface animated graphics, and a Set-up Wizard for easier start-ups.

According to DriSteem, additional LX Series highlights include:

  • Condensing design for highest efficiency and PVC venting.
  • Ultra-low NOx certified to SCAQMD 1146.2 standards.
  • Smart drain technology adjusts drain intervals automatically based on water quality.
  • Universal water control for use with any water type, including RO/DI water.
  • Modulating output with minimum 5:1 turndown for accurate humidity control.
  • Outdoor and indoor models for application flexibility.
Banner - CCGD
Banner - RBG
Copyright © 2021 - CPI Industry, Dubai - UAE. All rights reserved.